It’s no secret that the installation of the door frame is a rather difficult task that requires certain skills of carpentry.
The installation will require the following:
– door frame;
– drill;
– Drill on concrete of a certain size;
– self -tapping screws;
– Construction level.
Installation is carried out in stages:
In the lateral bars, the boxes make three holes, avoiding the drill entering the inter -shock space of the masonry of the wall.
A box is installed in the doorway using the indications of the construction level.
Through the available holes in the bars, they outline the place of drilling in the wall under the dowel.
Dowels are inserted, and with a screwdriver, screws are twisted to half.
Using the level, make control measurements, amendments, and all the screws are fully twisted.
After that, the presence of the gaps, the ease of opening and closing the door is thoroughly checked, are, if necessary, adjusted with screws.
At the final stage of the mounting foam, the cracks between the box and the wall are sealed, loops are hung and the canvas is installed.
Through the above actions, the door frame is installed very quickly and, most importantly, reliably, thanks to screwing the screws into metal dowels.