It is not so difficult to clarify the floor with porcelain slabs, but as a result it will be possible to achieve a great effect. Paul, composed of porcelain tile, has increased wear resistance and looks great. The technology of laying material is relatively simple.
In fact, the procedure of this type practically does not differ from the one that is carried out in the case of the use of conventional ceramic tiles. The difference is only the need to use two -part polymer tile glue. In the role of polymers that are present in its composition, Latex and acrylic usually acts.
At the preliminary stage, the floor surface should be cleared of pollution. The better the preparation is completed, the more effective the result of the work. Also, glue should be prepared immediately before laying, since within 5 hours it loses its qualities.
Apply the adhesive solution on the base of the floor. To do this, use a gear spatula, which leave special furrows on the material. As soon as the glue is applied, it is necessary to apply tiles. Subsequent elements should be located at a certain distance from the previous. This is necessary so that then there can be a grout to seal the cladding between them.