Recently, the demand for non -expensive showers has grown in large sizes and is gaining pace for its popularity. People understood the value of this product, a quick and useful acceptance of a shower in such cabins, compared with a long -term stay in the bathroom. In the absence of your shower, we recommend that you purchase one booth from a variety of assortment of many cabs. All procedures for installing a shower for a summer residence, it is possible to produce independently and without much effort on your part and spending a lot of physical effort. There are the main basic recommendations that we will tell you today, you should pay great attention to the performance characteristics and instructions of the manufacturer of your chosen shower cabin.
Employment of tools and materials:
– Equipment to the pallet and he himself;
– A plum hole, a diverting pipe for draining water and a siphon;
– Keys and measure equipment;
– Acrylic sealant;
Directly the process of this event:
1) it is worth finding and preparing a place for the future shower. It is necessary to install the pallet as follows that the suitable pipe of the drain was not too much. After installing the pallet, the pipe that is designed to drain water should be easily approached by this pallet, because if you do not correctly install the pipe of drain, then in the future it can negatively affect the drain of water from the pallet and turn out to be nerves and unnecessary disorder. So it is better to avoid such incidents with installation.
2) if necessary, you can install racks;
3) set the drain in a specialized place for this (despite the fact that, the pallets are in Sobrka, all these parts are not always present). Next, install the siphon.
4) install the racks vertically, this is how installation needs to be done, and there should be no problems in installing a siphon. By a means of a divorce key. Measure the accuracy with a measure after installation.
5) will install a siphon to a pipe for draining.
6) We hide the pipes from the bottom of the pallet, decorative panels from the sides (they should be included).
7) smear all connections, and edges with panels with a special sealant. This must be done in order to avoid the flow of water in the gap, and at the end of the washing in the shower, a large amount of water did not appear on the floor.
8) Now everything is ready! You can start installing a screen in a shower cabin.