The primer is performed after the putty dries after drying. When primed in two layers, the last layer is applied after the first drying (drying the soil 24 hours at a temperature of 18-20 °). There should be no passes, bloating, cracks and exfoliation in the primed surface.
The primer and color is performed by an electrode with a spray gun or painting bristles. Byazi primer with zinc white is performed with a brush.
If necessary, to breed the finished colors to the desired viscosity, a gas-storage generator (white spite) or turpentinery is used.
To primer and paint wet surfaces is not allowed.
The paint is applied with an even layer without passes and subteces. The first layer of paint is applied only after the soil dries completely, and each subsequent layer – after the previous. For final coloring, only freshly paint is used. The paint is delivered to the workplace in clean buckets.
The painted surface should not have passes, spots, subtexts, cracks, peeling or peeling.
The frame means reinforcement (wire or in the form of a ready -made metal mesh, metal cutting, drainage mesh, etc.), installed in a certain order in the layer of insulating structure.