Until the flooring of the parquet board, laminate, carpet or linoleum, it is necessary to conduct high -quality floor alignment. When the base is a wooden floor, first of all, you need to arm yourself with a hammer and a punrate, which need to drive all the hats of the nails below the surface of the floor. This is done for the purpose, so that then not to ruin the blade of the cycle machine. Near the pipes, walls and in the corners, the machine cannot process the surface, so there you need to manually do this work. If there are large cracks, they are poured with acrylic mass. Further, the entire surface of the floor is treated with moisture -resistant primer, it will also improve the adhesion of this old coating with a new.
With the help of strips of insulating material and double -sided adhesive tape, the entire perimeter is glued. After that, the desired height of the new sex is outlined with a pencil. A wooden bar is installed at the laminated door from the manufacturer, which will be a guideline when filling the floor. A construction stapler on the primed surface of the old floor laid a reinforcing mesh. At the next stage, a self -leveling mixture is poured, which is distributed by a rubber mop over the surface. It remains only to wait until the mixture dries after the expiration of the time specified by the manufacturer.