It is not easy to lay adhesive laminate and it is impossible to use many times. However, thanks to just such a complex installation method, this laminate will last a very long time.
A special expensive glue is used for laying, the replacement of which is with cheaper analogues is unacceptable. By the way, now they often began to buy inexpensive chairs for schoolchildren on the Internet.
Glue must be applied with an even layer along the entire length of the ends of the panels. Between the panel and the wall of the shares, to be a gap of at least 1 cm. The first panel is laid on the wall precisely the groove. Spit -free wedges are placed in the gaps, which must be removed after the completion of laminate laying.
The gaps that remained can be visible can be closed with plinths. Glue is applied to the upper groove. A spoon is inserted into the groove. Then, with the help of a hammer and a bar, knocked down a panel, excess glue is removed with a damp cloth. Thus the whole row is laid. The second row is laid differently. You need to cut the panel across. In this case, it is necessary to adhere to a displacement of 30 – 40 cm. Thanks to this laying method, the surface strength occurs. On the cut part of the panel you need to apply glue and dock with the panel of the first row.
After laying the first three rows, it is necessary to leave the work for 2 hours. So the whole laminate is mounted.